Details
Repair and Smooth Nearly Any Surface
#4118 Epoxy Fairing Compound is a smooth, creamy paste system for fairing surface imperfections on composites, wood, and primed metal parts, boasting excellent bonding during cure. This tough Epoxy Fairing Compound can be used to fill voids and provides a smooth transition in offset or stepped areas. It is also specially formulated for easy sanding and is moisture resistant, so the cured surface is blush-free and won't gum sandpaper during finishing.
This compound comes as a two-part kit and is mixed in an easy 1:1 volumetric ratio. Resin is off-white and hardener is gray. Once a complete mix is achieved, easily spread the creamy paste onto damaged or rough areas to create a smooth, cosmetic surface.
#4118 Epoxy Compound cures to be slightly flexible, which helps to resist cracking under stress or vibration for thin layers. However, if necessary, it can applied up to 1-1/2 inches thick—special "wet" spreadable viscosity prevents nearly any sagging, even at elevated temperatures.
- Pot Life: 85-95 minutes
- Mix Ratio: 100:65 (by weight); 1:1 (approximate, by volume)
- Cures at room temperature—no heat required for full cure
- Allow 4–5 hours (only) between multiple layers (at 77F)
- Finish sand in 16–18 hours
- Lightly sand before applying primer/paint
One "Quart Kit" includes one quart each of Parts A and B.
All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product.NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you.
